INKSCAPE: Converting a JPG or PNG into a SVG
"How do I create a SVG from an image I found on the internet?"
This question gets asked a lot in our Facebook group Cricut Lovers Guide to Design Space...
Well... first, make sure you're not breaching copyright by doing so! You should always respect the intellectual property rights of the artist who created the image. Using unauthorised/licensed images is done at your own risk. Whether they are for personal use or to sell/giveaway makes no difference.
Obviously your risk of receiving a cease and desist letter is minimal if you're using the image for your own personal use. But if you sell or share the file you made... or a product made with that file... then it's at your own risk.
In the example below I'm using a free image from https://openclipart.org/
These images are Public Domain images and are free to use, even commercially. For more information on the use of these images click HERE.
If you want to follow along using this image here's the link: https://openclipart.org/detail/46117/flower-six-red-petals-black-outline-green-leaf
You'll notice that there's 4 options when you go to download.
The first option will download the file as a SVG. But doing that spoils all the fun of you learning how to create a SVG yourself. So pick one of the other three options. Generally for the best result you should pick the highest resolution png or jpg image you can... which in this case means the "Big Image".
Click on that button and save the file to your computer. Don't forget to make a note of where you saved it.
Next you'll need Inkscape - If you don't have it installed yet, you can download it from https://inkscape.org/en/download/ Inkscape.org is the only site you should download this from. Downloading it from anywhere else can also add malware to your computer... and no one has time for cleaning that up!
Make sure you download the correct version for your computer.
If you are using Windows there are two versions... a 32 bit version and a 64 bit version. Check your System info (in Control Panel) to verify which version your computer is running.
For Mac users you will also need to install XQuartz. http://xquartz.macosforge.org/landing/
Open Inkscape, then click on File, Open (or the File, Open button)
If you click on the other flower it will show as an Image in the status bar.
Move that one over to the right out of the way then click back on your new image
Now you need to ungroup this image to see the four different layers.
Click on the Object menu and select Ungroup
Click on the red, yellow and green parts of the flower and move them to the side.
You won't actually be needing those now so you can go ahead and delete them. Just click on each one and press your delete key. (You can also select those three layers at the same time by dragging your mouse around them and clicking delete.)
Now you'll be left with the outline of the flower.
Next we're going to fill the empty spaces with colour. You can use any colour that you like, but for this exercise we'll match the colours from the original image.
From the toolbar on the left click on the Color Picker button. (Shown bottom left of this image and looks like an eye dropper.)
Click on any one of the red petals.
Click on the Fill button (the paint bucket)
Now click on any of the unfilled petals in the new image.
Click in each of the other petals to fill them.
Press the Esc button on your keyboard to deselect the traced flower. (You must do that or your petal will be filled with the next colour.)
Click on the Color picker tool again.
Click inside the green leaf to select that colour
Click the Fill tool
Click inside the leaf on your traced flower to fill it
Press Escape
Click the Color Picker tool
Click inside the yellow area
Click the Fill tool then inside the middle of the flower to fill it with yellow.
Now that all sections of the flower have been filled we can delete the original image. Click on it and press Delete.
Holding down the Shift button on your keyboard click each of the red petals in turn to select them.
Select the Path menu
Select Combine
The petals will now be combined into one image (or path)
You can move the red, yellow and green images to the side
Now we'll create the shadow for the image. The outline of the image is transparent. If we left it that way it would cut like this image below, which would make layering the image difficult. What we want is a solid background.
With the outline selected (either drag your mouse around the flower or click on one of the black lines) click the Path menu
Select Break Apart
The image will be broken up into its individual objects (paths)
Now click the Path menu again and select Union
The image is now one solid path
Move the other components of the flower over the black outline
Select the entire shape (Ctrl A)
Click the Object menu and select Group
Now you're ready to save your project as a SVG.
Click the File menu
Select Save As
Give your file a name
Then click the Save As Type box and select either Inkscape SVG or Plain SVG. Both will work in Design Space so it doesn't matter which one you select.
From a search of the difference between the two types of files: "The Inkscape SVG has additional information added into its format to ease editing within Inkscape"
So pick which ever you want. Inkscape always defaults to Inkscape SVG.
Click the Save button. Don't forget to make a note of where you saved it.
Now that you've created your SVG you can import it into Design Space.
Log into your Design Space account and click Create New Project
Click Upload Image
Click the Vector Upload option
Click the Browse button
Locate the file you saved to your computer and click Open
The preview of the SVG will appear in the preview window.
Add Keywords if desired. Make sure you place a comma between your keywords
Click SAVE
The SVG will appear in your Uploaded Images Library.
Click on it to select it and press the Insert Images button
Because I didn't adjust the size of the image in Inkscape it imported into Design Space quite huge. Simply select the image, go the the Edit panel and adjust the height or width of the image to the size you want it.
I've changed the height of my flower to 5"
Here is how your preview screen will look when you click Go. The four layers are placed on separate mats ready to cut.
And here's how they look in the Layers panel
You can ungroup them if you wish. And you can change the colour of any of the layers by clicking on the image in the layers panel and selecting a colour from the palette.
If you want to change this image from a cutting image to a Print then Cut image simply select the entire flower and click Flatten from the Layers menu. (Make sure your image fits in the maximum Print then Cut dimensions of:
Chrome: H 8" x W 5.5"
Firefox & Safari & IE: H 8.5" x 6"
The image as it appears as a Print then Cut. Only the outline will be cut.
More info:
Changing the size of the image in Inkscape.
Make sure you lock the proportions so that the height and width will change at the same time.
The default size is set at pixels (px) so click the drop down box to change it to inches.
Then change the size.
Keep in mind that the size you set here will not be accurately reflected in Design Space. Setting the height of the object here at 5" will result in an image that imports at approx 6.24". The reason for that is that Inkscape doesn't properly convert image sizes to inches. But it will be close and you can fix the size when you get it into Design Space.
Remember the Stack Scans option during the tracing process?
We left Stack Scans checked, however in this example we could have had it unchecked. In both cases we are deleting the coloured sections of the flower anyway, so it doesn't matter which we picked as all we wanted was the black outline.
This shows the different results you would get...
Lesson over! Hope you learned something! O Comments are welcome if you have any questions.
This website and its posts may contain affiliate links. If you purchase a product using the link I may receive a small commission.
I only participate in affiliate programs for products that I use and love.
Using the link is totally optional! If you don't wish to purchase through the link, you can go directly to the website and purchase from their shop. Please note there is no price difference to you between using the affiliate link and purchasing direct from the website. O
Any commission I receive is used to offset the costs of maintaining this website (domain fees etc) and file/photo storage fees for files that I share with my readers. It also goes towards the cost of giveaways and postage at Cricut Lovers Guide to Design Space Facebook group.
I have affiliates with Cricut.com, MightyDeals and InLinkz �
This question gets asked a lot in our Facebook group Cricut Lovers Guide to Design Space...
Well... first, make sure you're not breaching copyright by doing so! You should always respect the intellectual property rights of the artist who created the image. Using unauthorised/licensed images is done at your own risk. Whether they are for personal use or to sell/giveaway makes no difference.
Obviously your risk of receiving a cease and desist letter is minimal if you're using the image for your own personal use. But if you sell or share the file you made... or a product made with that file... then it's at your own risk.
Now that we've covered that... let's move onto the tutorial.
In the example below I'm using a free image from https://openclipart.org/
These images are Public Domain images and are free to use, even commercially. For more information on the use of these images click HERE.
If you want to follow along using this image here's the link: https://openclipart.org/detail/46117/flower-six-red-petals-black-outline-green-leaf
You'll notice that there's 4 options when you go to download.
The first option will download the file as a SVG. But doing that spoils all the fun of you learning how to create a SVG yourself. So pick one of the other three options. Generally for the best result you should pick the highest resolution png or jpg image you can... which in this case means the "Big Image".
Click on that button and save the file to your computer. Don't forget to make a note of where you saved it.
Next you'll need Inkscape - If you don't have it installed yet, you can download it from https://inkscape.org/en/download/ Inkscape.org is the only site you should download this from. Downloading it from anywhere else can also add malware to your computer... and no one has time for cleaning that up!
Make sure you download the correct version for your computer.
If you are using Windows there are two versions... a 32 bit version and a 64 bit version. Check your System info (in Control Panel) to verify which version your computer is running.
For Mac users you will also need to install XQuartz. http://xquartz.macosforge.org/landing/
Finally... let's get started!
Open Inkscape, then click on File, Open (or the File, Open button)
Locate your file and click the Open button.
Click on the image to select it. (If you don't select the image your trace won't happen.)
Click on the Path menu and select Trace Bitmap
The Trace Bitmap dialog box will open.
We want to create a group of paths so we'll be using the bottom section of the box.
As we are using a coloured image click on the Colors button.
Next you need to count the number of colours in your image. In this image there are four... red, yellow, green and black (the outline)
If you select 4 from the Scans box and press Update you'll notice that the leaf is black. So the rule I usually go by is the number of colours in the image plus 1
The settings you should now have are:
- Color
- 5 scans (the number of colours in the image + 1 remember..)
- Uncheck Smooth - Smooth applies a "Gaussian blur" to the image. Gaussian blur makes objects appear softer and less clearly defined. You don't want that so make sure you uncheck that box.
- Check the Stack Scans box - You can have this box unchecked but you'll get a different result. I'll show you that at the end of this tutorial.
- Check the Remove Background box. This will give your image a transparent background.
Once you have done that click the Update button. You'll see that all the colours are now correct.
Now click the OK button. You won't notice anything happening because the newly traced image has been placed above the original image.
Click the Close button on the Tracing Bitmap dialog box
Click on the image and move it to the side. You'll notice on the status bar at the bottom of the screen it will show that this is a Group of 4 objects. That's your new image.
If you click on the other flower it will show as an Image in the status bar.
Move that one over to the right out of the way then click back on your new image
Now you need to ungroup this image to see the four different layers.
Click on the Object menu and select Ungroup
Click on the red, yellow and green parts of the flower and move them to the side.
You won't actually be needing those now so you can go ahead and delete them. Just click on each one and press your delete key. (You can also select those three layers at the same time by dragging your mouse around them and clicking delete.)
Now you'll be left with the outline of the flower.
Next we're going to fill the empty spaces with colour. You can use any colour that you like, but for this exercise we'll match the colours from the original image.
From the toolbar on the left click on the Color Picker button. (Shown bottom left of this image and looks like an eye dropper.)
Click on any one of the red petals.
Click on the Fill button (the paint bucket)
Now click on any of the unfilled petals in the new image.
Click in each of the other petals to fill them.
Press the Esc button on your keyboard to deselect the traced flower. (You must do that or your petal will be filled with the next colour.)
Click on the Color picker tool again.
Click inside the green leaf to select that colour
Click the Fill tool
Click inside the leaf on your traced flower to fill it
Press Escape
Click the Color Picker tool
Click inside the yellow area
Click the Fill tool then inside the middle of the flower to fill it with yellow.
Now that all sections of the flower have been filled we can delete the original image. Click on it and press Delete.
Holding down the Shift button on your keyboard click each of the red petals in turn to select them.
Select the Path menu
Select Combine
The petals will now be combined into one image (or path)
You can move the red, yellow and green images to the side
Now we'll create the shadow for the image. The outline of the image is transparent. If we left it that way it would cut like this image below, which would make layering the image difficult. What we want is a solid background.
With the outline selected (either drag your mouse around the flower or click on one of the black lines) click the Path menu
Select Break Apart
The image will be broken up into its individual objects (paths)
Now click the Path menu again and select Union
The image is now one solid path
Move the other components of the flower over the black outline
Select the entire shape (Ctrl A)
Click the Object menu and select Group
Now you're ready to save your project as a SVG.
Click the File menu
Select Save As
Give your file a name
Then click the Save As Type box and select either Inkscape SVG or Plain SVG. Both will work in Design Space so it doesn't matter which one you select.
From a search of the difference between the two types of files: "The Inkscape SVG has additional information added into its format to ease editing within Inkscape"
So pick which ever you want. Inkscape always defaults to Inkscape SVG.
Click the Save button. Don't forget to make a note of where you saved it.
Now that you've created your SVG you can import it into Design Space.
Log into your Design Space account and click Create New Project
Click Upload Image
Click the Vector Upload option
Click the Browse button
Locate the file you saved to your computer and click Open
The preview of the SVG will appear in the preview window.
Add Keywords if desired. Make sure you place a comma between your keywords
Click SAVE
The SVG will appear in your Uploaded Images Library.
Click on it to select it and press the Insert Images button
Because I didn't adjust the size of the image in Inkscape it imported into Design Space quite huge. Simply select the image, go the the Edit panel and adjust the height or width of the image to the size you want it.
I've changed the height of my flower to 5"
Here is how your preview screen will look when you click Go. The four layers are placed on separate mats ready to cut.
And here's how they look in the Layers panel
You can ungroup them if you wish. And you can change the colour of any of the layers by clicking on the image in the layers panel and selecting a colour from the palette.
If you want to change this image from a cutting image to a Print then Cut image simply select the entire flower and click Flatten from the Layers menu. (Make sure your image fits in the maximum Print then Cut dimensions of:
Chrome: H 8" x W 5.5"
Firefox & Safari & IE: H 8.5" x 6"
The image as it appears as a Print then Cut. Only the outline will be cut.
More info:
Changing the size of the image in Inkscape.
Make sure you lock the proportions so that the height and width will change at the same time.
The default size is set at pixels (px) so click the drop down box to change it to inches.
Then change the size.
Keep in mind that the size you set here will not be accurately reflected in Design Space. Setting the height of the object here at 5" will result in an image that imports at approx 6.24". The reason for that is that Inkscape doesn't properly convert image sizes to inches. But it will be close and you can fix the size when you get it into Design Space.
Remember the Stack Scans option during the tracing process?
We left Stack Scans checked, however in this example we could have had it unchecked. In both cases we are deleting the coloured sections of the flower anyway, so it doesn't matter which we picked as all we wanted was the black outline.
This shows the different results you would get...
Lesson over! Hope you learned something! O Comments are welcome if you have any questions.
Happy crafting! �
This website and its posts may contain affiliate links. If you purchase a product using the link I may receive a small commission.
I only participate in affiliate programs for products that I use and love.
Using the link is totally optional! If you don't wish to purchase through the link, you can go directly to the website and purchase from their shop. Please note there is no price difference to you between using the affiliate link and purchasing direct from the website. O
Any commission I receive is used to offset the costs of maintaining this website (domain fees etc) and file/photo storage fees for files that I share with my readers. It also goes towards the cost of giveaways and postage at Cricut Lovers Guide to Design Space Facebook group.
I have affiliates with Cricut.com, MightyDeals and InLinkz �
Thanks for the amazing tutorial on how to convert jpg to vector. I was looking for the same info. Good job. Thanks.
YanıtlaSil